 |
 Here are some notes on ordering rifles |
|
1st step:
You may order by E-mail or, by using the order form, by post. Here you can download the order form  !
Please fill in the order form giving as many details as possible. If available, please enter your E-mail address. This makes communication much easier.
Any open questions can best be discussed directly with me by E-mail. This also gives me the chance to get to know your requirements exactly and allows me to make a suitable weapon for you. In addition, I can also give you information in regard to the delivery date. |
|
2nd step:
So that I can finish the suitable stock length, it is necessary for you to determine the dimension A and enter this in the order form.
Should "your" corresponding stock length (dimension Y) be known, then you can enter the dimension Y in the order form without details of dimension A. Here you can find details on how to measure the length of the stock.
How to measure the dimension A:
This dimension can be determined in the easiest way should the size of an existing rifle be known.
Bend your lower arm to 90°and place the stock of the rifle in the curve of your arm. Hold your hand, including your fingers, straight (Picture 1).
Picture 1 |
|
 |
|
Measure the distance X from the kink in the skin of the first knuckle of your finger to the trigger (Picture 2).
Picture 2 |
|
 |
|
Now measure the dimension Y (that is the stock length). The stock length is measured from the bend of the trigger to the bend of the butt plate (Picture 3). The dimension Y plus dimension Xgives the dimension A (or minus dimension X, depending on whether the knuckle of your first finger was in front of or behind the trigger).
Picture 3 |
|
 |
|
3rd step:
After receipt of your order, you will receive a wriiten order confirmation from me. In this, you will find details of your order.
As a final step, please transfer 1/3 of the total price as a deposit (the bank details will be sent with the order confirmation). |
